01173 326645

support@catersigns.co.uk

Deluxe Cafe Barrier Replacement Graphic Double Sided

Deluxe Cafe Barrier Replacement Graphic Double Sided
These replacement graphics are all you need to completely re-skin a Deluxe Café Barrier. This can be a more cost-effective way of prolonging already-purchased units.

Unit not included with replacement graphics.

• Bespoke-printed graphic printed on Display Polyester.
• Includes a pole pocket along the top, with eyelets in the bottom corners.
• Finished with a blockout lining between sides to prevent light show-through.
• Finished with no visible horizontal stitching for a more seamless look than many other café barriers, this allows a design to make more effective use of the entire printed area.

There is no additional charge for more than one design or artwork for your order, no matter how many graphics you are ordering or whether you are ordering single-sided or double-sided graphics.

Please ensure you choose your correct banner size below, if you only require a single sided printed banner you can find them here


Important Information Regarding Artwork


Once you have placed your order with us, please email support@catersigns.co.uk with your artwork.

Our Artwork guidelines can be found below, should you have any difficulty or require any assistance with this please contact our customer care team on 01173 326645

Availability: Out of stock

Deluxe Cafe Barrier Replacement Graphic Double Sided

Replacement Graphic for 1500 Double-Sided Deluxe Café Barrier

Excl. Vat: £131.00 Incl. Vat: £157.20
Deluxe Cafe Barrier Replacement Graphic Double Sided

Replacement Graphic for 2000 Double-Sided Deluxe Café Barrier

Excl. Vat: £69.00 Incl. Vat: £82.80
Description

Details

Consider where you position your Café Barrier, as air pollution will cause the white areas to become grey and UV can, over time, cause deterioration and fading to the fabric.

Graphics can be washed in a regular washing machine on a 30° wash without detergents. Always allow the graphic to completely dry before storing.

Café Barrier graphics should be taken down during adverse weather conditions, including strong winds in excess of beaufort scale 4 (13-18mph). Heavy rain combined with high winds can increase the weight of the graphic and put extra strain on the finishing and fittings.

Life expectancy is entirely dependant on the climatic conditions and length of active use. Realistic maximum lifespan of a regularly used Café Barrier graphic is one year.
Artwork

Details

Artwork Requirements

For your artwork to be produced accurately, please ensure that you follow the requirements below;

• With any fonts outlined
• With any images embedded
• Including the document bleed
• With any template elements (such as lines, boxes and markings) removed
• As either PDF (preferred), AI or EPS format

Please note that we cannot be held responsible for issues contained in the supplied artwork itself such as spelling mistakes, grammatical errors, RGB colour mode, overprint, resolution, missing fonts, missing images and layers set to non-printing. To avoid these issues, please ensure your artwork adheres to our requirements, please find full details of our artwork and design service here

Artwork not supplied to our requirements will likely render an unsatisfactory result or delay your order. If you are unsure about the artwork you have, please check with us beforehand to ensure there are no complications with your order.

If artwork cannot be used to produce what has been ordered, we will advise you of this and request how you would like to proceed.

If an artwork size is different to the ordered size, the ordered size always takes precedence. This is due to the fact that artworks from our customers are supplied in a variety of scales.

With subjective issues of quality such as image resolution, we will sometimes advise you if the quality is extremely low, though again, we cannot be held responsible if the artwork is supplied in such a manner and isn’t suitable for your needs.

Important Information Regarding Artwork

Once you have placed your order with us, please email support@catersigns.co.uk with your artwork. Our Artwork guidelines can be found below, should you have any difficulty or require any assistance with this please contact our customer care team on 01173 326645

Materials

Details

Steel components with powder-coated black finish.

• 360mm diameter base.
• Includes 1360mm or 1890mm -wide graphic printed double-sided
• Bespoke-printed graphic printed on Display Polyester.
• Double-sided graphics include a pole pocket along the top
Reviews

You may also be interested in the following product(s)